The glass fiber ceiling adopts the most advanced production technology in the world, strictly selects high-quality glass fiber as the basic material, and sprays a special coating or covers the surface with decorative glass felt, glass according to the different requirements of appearance and performance. Fiber cloth. The advantages of fiberglass ceiling are that it can achieve the effect of strong sound absorption in the whole frequency band, better decoration effect, and good fire resistance. The following are the advantages and installation steps of the glass fiber ceiling introduced by the Sound Absorption Ceilling Board supplier.
First, the advantages of fiberglass ceiling
1. Fiberglass ceilings have excellent sound absorption performance. Generally, the ceiling installation cavity on the back of the building ceiling is usually greater than 200mm. The low-frequency sound absorption coefficient will be greatly improved due to the cavity, so the fiberglass ceiling can achieve the effect of strong sound absorption in the entire frequency band.
2. The glass fiber ceiling has good decoration and the surface is painted and has color, which has better decorative effect.
3. The fire resistance of glass fiber ceiling is good. As the main raw material of the board is glass fiber, which is a non-combustible material, the glass fiber ceiling has a fire resistance rating of A.
4. The fiberglass ceiling is thin and light. The thickness of the plate is relatively thin, the weight is light, and the areal density is about 2.0 to 3.0 kg / mz, which is convenient for transportation and storage.
5. The structure of Fiber Glass Ceilig Board is simple and easy to install. The glass fiber decorative sound-absorbing ceiling does not need the protective decorative surface layer of ordinary glass fiber boards, and there is no fiber scattering to pollute the environment, and the construction site is clean. Installation using metal keels can be either light keels or dark keels, which is not only easy to install, but also convenient for maintenance and replacement in the future, and the added load on the building structure is small and relatively safe.
Fiber Glass Ceilig Board
Because the fiberglass ceiling is lightweight. Moreover, it is a full-band strong sound-absorbing material, suitable for large-span buildings such as stadiums, exhibition halls, large shopping malls, and high-noise workshops as sound-absorbing ceilings, which can effectively reduce indoor reverberation and make the environment more quiet.
Specification of fiberglass ceiling
The glass fiber ceiling is a new type of glass wool product integrating sound
absorption, heat insulation and decoration. It is made of high-density (about
100kg / m3) glass wool board, which is cured at all edges. The surface, back and
edges of the board are covered with glass fiber felt. The glass fiber felt is
spray-decorated. According to the thickness of the plate, there are 15mm, 20mm
and 25mm, etc., which can be customized according to customer requirements.
Installation of fiberglass ceiling
The fiberglass ceiling has three installation methods: open frame, concealed frame and downgrade. The construction is very convenient and fast, and the site is relatively clean. The installation steps are as follows.
1. Measure the length and width of the ceiling, and arrange symmetrically from the center of the ceiling to the sides of the ceiling according to the width of the glass fiber decorative acoustic ceiling.
2. Install light steel or aluminum alloy keel according to the arrangement of sound absorbing panels.
3. Pass the fiberglass ceiling diagonally through the installation keel, and then let go.
The above is the installation method of the glass fiber ceiling introduced by the supplier of Mineral Fiber Ceiling Tile. Using this installation method can make you take better care and hope to help everyone.
Copyright © Shi Jia Zhuang Bei Hua Mineralwool Board Co., Ltd. All Rights Reserved | Sitemap | Powered by